Hills & Fleurieu Drone Services

Aerial Photography and Videos

A drone allows you to look at the world from a different perspective and then use the resulting images for anything that you desire.

You tell me where you want the image taken from and I’ll do the flying and create you a panoramic view:

Pan2_20180924151835

Or just standard pictures looking down on your world:

Picture2

Of course videos are even better – this is one I did for First National Real Estate Ollwitz for a property is Currency Creek SA

Aerial Inspections – Roofs
Drones are a safer, cost-effective alternative to “Boots on the Roof” which can be dangerous and expensive especially for steep, high or fragile roofs.
Whether you want to see the big picture:
DJI_0134
Or zoom it in the check on a specific area:
DJI_0132.JPG
Or further in:
DJI_0132.png
Whether it is a home or business, pictures tell the story better then words!

Aerial Site History

There are many projects that need some form of site history to show what has changed over time, a drone can be programmed to go to the same spot and take the photos in the same direction time after time.

Or, if some major excavation needs to be documented, like below; the drone’s eye view can show a lot more then the shot from the ground ever would.

DJI_0038 - Copy

Aerial Photography and Processing

Flying a drone over land and taking a series of high resolution photos is just the first step of a longer process to turn those photos into something usable and useful.
First you take the hundreds of photos and run them through software to create the the orthomosaic which is georeferenced and orthorectified as well as Digital Surface/ Terrain models and even 3D models.
Georectification is the process by which the remotely sensed raster image (the orthomosaic of images) is linked in to a coordinate system so that it can be accurately located onto a map.
Orthorectification is the process of removing the effects of tilt and terrain for the purpose of creating a “correct image” which depicts each pixel in the image as if it were collected from directly overhead or as close to this as possible.
The below orthomosiac was created by stitching together 160 images
FullOrtho
Depending what is required, the picture might be all that is required,  but further post processing needs to be applied.
Such as adding contours which uses the Digital Elevalation Model with further processing within a GIS system.
FullOrthoContour
Or creating a grey scale HillShade
FullHillShade
Or a more colourful Digital Surface model
FullColourMap
Or even a VARI vegetation index (which uses yet another post processing piece of software, in this case a Python script!). VARI is a measure of “how green” a normal RGB image. With the VARI algorithm applied it makes it possible to detect areas of crop stress in a field – the field below which is near Mannum is very stressed !
FullVegi